20
EN
Select a radio range
1
Tap
[Radio Range]
.
2
Tap
[Distance]
or
[Local]
to select a
tuner sensitivity.
•
[Distance]
: Stations with strong
and weak signals can be tuned
to.
•
[Local]
: Only stations with strong
signals can be tuned to.
Enable the RDS feature
Note
•
RDS feature is enabled by default.
•
Only after the RDS feature is enabled, the
option of
[PTY list]
is displayed.
Tap
[RDS On]
to enable the RDS
feature.
»
The option of
[PTY list]
is displayed.
•
To disable the RDS feature, tap
[RDS Off]
.
Tune to a radio station
1
Tap
FM
or
AM
to select a band.
•
FM bands:
FM1, FM2, FM3
•
AM bands:
AM1, AM2
2
Tap or repeatedly until the
frequency of target radio station is
displayed.
•
To tune to a radio station
automatically, tap and hold or
until the frequency digits start
change.
Tip
•
You can also press
BAND
on the remote
control repeatedly to select a band.
Store radio stations in
memory
You can store up to 6 stations in each
band.
Store radio stations manually
1
Select a band.
2
Tune to the target radio station.
3
Tap and hold one of the channels (
1
to
6
) over two seconds.
»
The radio station is saved under
the selected channel.
