11
EN
4 Get started
Caution
•
Risk of car accidents! Never watch video or
operate this system while driving.
Prepare the remote
control
For the first time use
Pull the protective sheet out.
»
The remote control is ready for use.
Replace the battery
Caution
•
Risk of explosion! Keep batteries away
from heat, sunshine or fire. Never discard
batteries in fire.
Note
•
Remove the battery if it is exhausted or if
the remote control is not to be used for a
long time.
•
Batteries contain chemical substances,
they should be disposed of properly.
•
Perchlorate Material - special handling
may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate.
1
Pull out the battery tray.
2
Insert one CR2025 battery with
correct polarity (+/-) as indicated.
3
Insert the battery tray.
Turn on
Press
.
»
PHILIPS logo and a progress bar are
displayed while boot-up.
•
To turn off the system, press and
hold
for 3 seconds.
For the first time use
After successful boot-up, the following
interface is displayed.
1
Tap to select a language for on-
screen display.
»
The following interface is
displayed.
