A-B editing (on CD changer only)
You can create a “track” by marking a passage of music
within one track on the current disc.This new “track” can
be used for recording or playing.The minimum track length
is 4 seconds.
Note:You can only make an A-B edit for a normal Audio
CD(RW).
1
Press A-B EDIT on the set.
➜
EDIT TRACK
starts blinking,
TRACK
and the current track
number
?
are displayed.
2
Rotate the
¡
EASY JOG
™
control until the desired track
number is displayed.
3
Press YES to confirm the selected track.
➜
FROM A
=
XX
:
XX
and the track time will be displayed.
The first 4 seconds of the track will be played
continously.The initial position of marker A is always the
start of the chosen track.
0
To fast forward to the desired start position press
5
or
6
on the set.
0
To fine tune the position then rotate the
¡
EASY JOG
™
control.
4
Press YES or A-B EDIT to confirm the position of marker a.
➜
TO B
=
XX
:
XX
and the new “track” time will be
displayed.The first 4 seconds before marker position B
until marker position B will be played continously.The
initial position of marker B is always the position of
marker A plus 4 seconds.
0
To fast forward to the desired stop position press
5
or
6
on the set.
To fine tune the position rotate the
¡
EASY JOG
™
control.
5
Press YES or A-B EDIT to confirm the marked passage.
➜
EDIT TRACK
is shown,
A-B
and the track edit time are
displayed.
➜
The new “track” will be stored.
0
Press PLAY/PAUSE
2
/
;
to play the ”track”.
0
Press RECORD to record the ”track”
(also see ”Recording”).
Note: A-B EDIT can also be pressed during play.The Track Edit
procedure will then start from the position where A-B EDIT was
pressed.
Clearing the A-B edit
1
Press NO during stop.
➜
CLEAR A-B ?
is displayed.
2
Press YES to clear the markers.
➜
The markers A-B are cleared.
Note: If you open the CD changer tray the A-B edit is deleted.
Special features
24
English
xp CDR 800/00 eng.-1.1 18-07-2001 13:54 Pagina 24
