Philips BDP5506 Скачать руководство пользователя

Страница: 28 / 63

1-10-1

E5WA0ER

ERROR MESSAGE

Note:

Only error messages for the unit’s corresponding media will appear.

Error

Message

Disc Error

Disc Error
- - Please eject the disc. - -
Playback feature may not be available on this Disc.

Loader Error

Loader Error
The unit stopped automatically due to loader error.
Please open the disc tray once and then close it.

Parental Lock Error

Parental Lock On
The current selected parental level prohibits playback.

Region Error

Region Error
Playback is not authorized in your region.
Region code of this disc :

The device connected for HDMI
connection does not support HDCP.

(There is no message.)
The following error will appear on the VFD.

USB/SD Card Error

Memory Device Error
- - Please check the Memory Device. - -
There is no playback file on the Memory Device or Device has incorrect/
no format.

BD-Live Network Connecting Error

BD-Live Setting Error
Network connection is interrupted. Please confirm “BD-Live Setting”.

LAN Cable Not Connected

The cable is not correctly connected.
Please confirm the connection of the cable.

Cannot Acquire DHCP Server

DHCP cannot be acquired.
Please set whether to confirm the connection with the manual.

Cannot Acquire IP Address

Internet Protocol address is not set.
Please confirm a set content.

Already Existing IP Address

The equipment with same Internet Protocol address already exists.
Please set another Internet Protocol address.

No Response From Default
Gateway

There is no response from Default gateway.
Please confirm the address of Default gateway.

Cannot Connect To DNS Server

It is not possible to connect it with the DNS server.
Please confirm the Internet connection or the DNS address setting.

Disc Error

- - Please eject the disc. - -

Playback feature may not be available on this Disc.

Содержание BDP5506
































































Результаты поиска

Содержание BDP5506

Отзывы:

Похожие инструкции для BDP5506

Бренды по названию

Популярные бренды

Philips BDP5506, Руководство по обслуживанию

Результаты поиска

Содержание BDP5506

Отзывы:

Похожие инструкции для BDP5506

Бренды по названию

Популярные бренды