Philips BDL5531EL/00, Руководство по обслуживанию

Страница: 116 / 129

116 BDL5531EL LCD
General Product Specification
PIP source 0x84
Audio parameters get 0x43
Audio parameters set 0x42
Volume get 0x45
Volume set 0x44
Miscellaneous info 0x0F
Smart power 0xDD
Video alignment 0x70
Auto Adjust 0x70
Image Flip Get 0x2B
Image Flip Set 0x2A
Temperature Get 0x2F
Tiling Get 0x23
Tiling Set 0x22
z
Compatibility Test
z
3
rd
Party HDMI/PC Test: Allion Test Lab
10.5 Design quality and reliability review and validation procedure
These are activities that should be executed by Supplier and MMD group per product creating
process. Supplier must provide whole quality and reliability testing and evaluation report to
DQE. DQE will be responsible for reviewing the design quality and reliability report with
verification and validation.
10.5.1 There are design quality and reliability reviews for each product respectively
The design quality and reliability review is required whenever a new product is starting to be
created from supplier in either electrical or mechanical parts.
During design and evaluation phase, detailed design quality and reliability reviews are required
from EVT stage to DVT and PVT stage respectively.
10.5.2 Quality and Reliability evaluation and testing report
Supplier should provide product quality and reliability evaluation and testing report in each
product developing milestone to DQE for review. This is not limited to three times. Intensive and
comprehensive design reviews are recommended whenever required.
10.5.3 General Review Procedure
1) Review DQE pending items of previous review meetings.
2) Check the current status of all tests and evaluations which should be done and provided
by supplier before the meeting.
3) Discuss the design quality and reliability by means of circuit walk through, assembly and
disassembly and assess the potential risks.
4) List down suggestions /attention points /remaining problems and action plan. (Or
countermeasure).