Philips BDL5531EL/00, Руководство по обслуживанию

Страница: 4 / 129

4 BDL5531EL LCD
Installation
FRONT VIEW
1. Remote control sensor, ambient light sensor and power
indicator
• Receives command signals from the remote control.
• Detects the ambient lighting conditions around the display.
• Indicates the operating status of the unit:
- lights green when the display is turned on
- lights red when the display is in standby mode
- blinks green when remote control signal is received
- blinks red when the display enters DPMS mode
- off when the main power of the display is turned off
REAR VIEW
1. VIDEO SOURCE button
• Use this button to select the input source.
• When the On Screen Display menu is active, this is also
used as the
SET button.
2. MENU button
• Use this button to engage the On Screen Display menu.
• When the On Screen Display menu is active, use this button
to return to the previous menu.
3.
/
button
• When the On Screen Display menu is active, use these as
the
UP/DOWN menu buttons.
• Press and hold the and buttons simultaneously for 3
seconds to lock or unlock all buttons.
4.
/
button
• When the On Screen Display menu is active, use these as
the
PLUS/MINUS menu buttons.
5. POWER button
Use this button to turn the display on or into standby mode.
6. Power indicator
Indicates the operating status of the unit:
- lights green when the display is turned on
- lights red when the display is in standby mode
- blinks red when the display enters DPMS mode
- off when the main power of the display is turned off
7. Smart Insert installation holes
Location for the Smart Insert (for integration of a small form factor PC)
and M4 screws. (Maximum load: 2kg)
8. Cable retainer installation holes
Install the cable retainer using these holes
.
INPUT/OUTPUT TERMINALS
1. VIDEO IN (HDMI)
Connects to the HDMI output of an AV device or to the DVI-D output of a
PC. (Using a DVI-HDMI cable)
2. VIDEO IN (DVI-D)
Connects to the DVI-D output of a PC or to the HDMI output of an AV
device (Using a DVI-HDMI cable).
3. VGA OUT
Outputs the VGA signal from the VGA IN jack.
4. VGA IN
Connects to the VGA output of a computer.
5. RS-232C (OUT/IN)
RS232C network connection input/output for the use of loop through
function.
6. VIDEO IN (COMPONENT)
Component video input (YPbPr) for connecting to the component output
of an AV device.
7. VIDEO IN (S-VIDEO)
S-Video input for connecting to the S-Video output of an AV device.
8. VIDEO OUT
Connects to the video input of an AV device or another BDL5531EL unit.
9. VIDEO IN
Connects to the video output of an AV device or another BDL5531EL
unit.
10. AUDIO IN (AUDIO1)
Connects to the audio output of a computer.
11. AUDIO OUT R/L
Outputs the audio signal from the AUDIO IN ( AUDIO1 / AUDIO2 / AUDIO3 )
or HDMI jack.
12. SPEAKERS R/L
Outputs the audio signal from the AUDIO IN ( AUDIO1 / AUDIO2 / AUDIO3 )
or HDMI jack to external speakers.
13. AUDIO IN (AUDIO2/AUDIO3)
Connects to the audio output of an AV device.
14. Main power switch
Press to switch the main power on/off.
15. AC IN (4.0 A)
Connects the supplied power cord to the wall outlet.
16. AC OUT (2.0 A)
Can be used to power an external media device.