Philips BDL5531EL/00, Руководство по обслуживанию

Страница: 69 / 129

BDL5531EL LCD 69
General Product Specification
The following DDC/CI commands should be supported via command line:
No. Commands
1 Set Brightness
2 Set Contrast
3 Set Red Gain
4 Set Green Gain
5 Set Blue Gain
6 Get Brightness
7 Get Contrast
8 Get Red Gain
9 Get Green Gain
10 Get Blue Gain
2.4 Service mode
Detailed technical specification refers to Service delta technical specs.
x
Software Update:
¾
Through RS-232
2.5 Power Supply
2.5.1 Power supply features
x
AC line voltage range - 90Vac ~ 264Vac.
x
AC line frequency range - 50-60 Hz
r
3 Hz.
x
DC tact switch - Minimal power consumption when switch off
x
AC mains switch - No power consumption when switch off.
x
Inrush current - < 40A at 240Vac when cold start.
x
Leakage current - < 0.5mA at 240Vac.
x
Power factor correction - According to EN61000-3-2
2.5.2 Power consumption
x
Normal on - 110w (typical), 158 w(max.)
x
Standby - < 0.5w, RC standby mode
x
Switch off (DC or TACT) - < 0.3w, RC in-active
x
Switch off (AC mains) - < No power consumption.
2.5.3 Display DPM standby (D-sub & HDMI input)
z
DPM - The Display enters DPM off (sleep) mode when no H&V sync, one of H-
sync / V-sync input or digital clock is absent. “No Video Input” message appears
before entering DPM mode. A delay of 15 seconds before entering the power