Philips BDL4785SL/00, Руководство по обслуживанию

Страница: 77 / 141

77 BDL5585XL LCD
General Product Specification
2.5.2 Power consumption
x
Normal on - 81 w (typical), 131 w(max.)
x
Standby - < 0.5w, RC standby mode
x
Switch off (DC or TACT) - < 0.5w, RC in-active
x
Switch off (AC mains) - < No power consumption.
2.5.3 Display DPM standby (D-sub & HDMI input)
z
DPM - The Display enters DPM off (sleep) mode when no H&V sync, one of H-sync /
V-sync input or digital clock is absent. “No Video Input” message appears before
entering DPM mode. A delay of 15 seconds before entering the power saving
state is required to avoid misunderstanding of display resolution and timing mode
changes.
z
Recovery from DPM - Power & function recover when either H & V syncs or digital clock
are detected.
z
Standby - The Display enters “AV standby mode” when it’s switched off by RC.
“Standby/Power” key or SLEEP TIMER function is activated or no AV signal
input for 15 seconds.
z
Recovery from Standby - Power & function recovers when RC “Power” is pressed.
2.6 User Control Interface
Controlled via top control keypads or remote control or RS-232 or RJ45.
2.6.1 Hidden controls
It can’t be easily accessed in front of the set.
To be revised according to new graphic sheet.
`
Key PC mode AV mode
DC switch power standby DC switch power standby
Decrease/Volume down Decrease/Volume down
Increase/Volume up Increase/Volume up
Ÿ
MENU Select Down Menu Select Down/Channel Down
ź
MENU Select Up Menu Select Up/Channel up
MENU Enter /Exit OSD menu Enter /Exit OSD menu
ENTER
VIDEO SOURCE