POWER SUPPLY
IMPORTANT!
For best CD/MP3-CD/VCD playback, please plug in your set to an AC power supply where
convenient.
If operated in DC mode, see below approximate playtime. (Playtime is also varied from
different brand batteries) :
The CD part of this system also serves as a Video CD player if you connect it to your TV
set.
Before viewing the Video CD, ensure that the set is switched to corresponding PAL or
NTSC system of your TV set (exception Multi-system TV).
Whenever convenient, use the mains supply if you want to conserve battery life. The battery supply
will be switched off when the set is connected to the mains. Make sure you remove the plug from the
set and wall outlet before inserting batteries.
Batteries
1.
Open the battery compartment and insert six batteries, type
R20
,
UM1
or
D-cells
, (
preferably alkaline
) with the correct
polarity as indicated by the "
+
" and "
-
" symbols inside the
compartment.
Remote control
Open the battery compartment and insert two batteries,
type
AA
,
R6
or
UM3
(preferably alkaline).
2.
Replace the compartment door, making sure the batteries are
firmly and correctly in place.
3.
Remove the batteries if they are exhausted or if they will not be
used for a long period.
– The incorrect use of batteries can cause electrolyte leakage
and will corrode the compartment or cause the batteries to burst. Therefore:
– Do not mix battery types, e.g. alkaline with zinc carbonate.
– When inserting new batteries, replace all at the same time.
– Remove the batteries if the set is not to be used for a long time.
Helpful hints:
– The battery supply is switched off when the set is connected to the mains.
Batteries contain chemical substances, so they should be disposed of properly
TV screen is disabled during CD / MP3-CD playing if your AZ2536 is
battery powered.
BATTERIES (NOT SUPPLIED)
9
English
AZ 2536/01
page
9
Battery type
Playtime
Alkaline
approximate 9 hrs
Zinc Carbonate
approximate 2 hrs
AZ2536_01 eng 4/7/2004 05:51 PM Page 9
