CASSETTE RECORDER
21
English
AZ 2536/01
page
21
Cassette playback
1
Select
TAPE
source.
™
Display: shows
throughout tape operation.
2
Press
STOP • OPEN
9 /
to open the cassette door.
3
Insert a recorded cassette and close the cassette door.
4
Press
PLAY
1
to start playback.
5
To interrupt playback press
PAUSE
;
. To resume, press this key
again.
6
By pressing
SEARCH
5
or
6
on the set fast winding of the tape is possible in both directions.
7
To stop the tape, press
STOP • OPEN
9 /
.
• The keys are automatically released at the end of a tape, except if
PAUSE
;
has been activated.
General information on cassette recording
• Recording is permissible insofar as copyright or other rights of third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC
II
) or METAL (IEC
IV
) type cassettes. For
recording you should use NORMAL type cassettes (IEC
I
) on which the tabs have not been
broken.
• Check and tighten slack tape before use with a pencil, to avoid jamming the deck machanism.
• The recording level is set automatically. Altering the VOLUME MAX SOUND or BASS, MID &
HIGH controls will not affect the recording in progress.
Helpful hints:
-
No recording will take place during the 7 seconds in the beginning of the tape.
• To prevent the accidental erasure of a recording, keep the
cassette side to be safeguarded in front of you and break out
the left tab. Recording on this side is no longer possible.
CASSETTE RECORDING
CASSETTE PLAYBACK
1
AZ2536_01 eng 4/7/2004 05:51 PM Page 21
