GENERAL OPERATION
1.
Press
STANDBY ON
y
on the set to switch on.
2.
Press
SOURCE
once or more to select your desired function:
CD • VCD, FM, MW, TAPE
3.
Press
STANDBY ON
y
to switch the set to standby.
Helpful hints :
–
To change from
TAPE
to
CD • VCD, FM
or
MW
source, or when you are switching off the set:
first, make sure you press the tape
STOP
9
key to end playback and all the cassette keys are
released.
–
T
he tone, sound settings, tuner presets and the volume level (up to a maximum volume level of
VOL 20
)
will be retained in the set's memory
.
1.
Adjust the volume with the
VOLUME
control.
=
Display shows the volume level
and a number from 0-32.
2.
MAX SOUND
To enhance the bass response: press
MAX SOUND
once or more to
switch on / off.
=
MAX SOUND
-
key backlight lights up when
MAX SOUND
is
turned on.
Helpful hints :
–
MAX SOUND
can be used when you play CD, VCD, FM, MW and TAPE source
.
–
Some discs might be recorded in high modulation, which causes a distortion at high volume.
I
f this
occurs, deactivate
MAX SOUND
or reduce the volume.
3.
EQUALIZER
To adjust the bass, mid and high frequencies, press
EQUALIZER
once
or more (or press
EQ
on the remote control), then rotate
VOLUME
within 3 seconds to adjust each level.
=
Display briefly shows
,
,
or
level
(-5 to
+5)
or
.
Helpful hints:
–
EQUALIZER
can be used during CD, VCD, FM, MW and TAPE source.
–
To prevent sound interference the bass control options operate exclusively.
You cannot combine the bass from
EQUALIZER
with
MAX SOUND
ADJUSTING VOLUME AND SOUND
SWITCHING ON AND OFF
11
English
AZ 2536/01
page
11
AZ2536_01 eng 4/7/2004 05:51 PM Page 11
