Alignments
6.
•
Core SSB spare part can be used in other CTNs within
same HW group by changing Panel Code, option code
wherever applicable.
•
Latest SW is to be loaded to Core SSB from P4C if
required.
6.6
Cable position numbers
In this chassis, the cable position numbers can be defined via
the rule that the number is always starting with “8” followed by
the connector number of the sourcing board. The order is
always seen from where the power initiates from. So from PSU
to SSB, from SSB to IR/LED panel, from IR/LED panel to
keyboard control panel.
Example: In a 8601 set the cable from the Bolt-on FRC
connector CN1155 to the SSB connector CN1155 has position
number 8CN1155.