Philips 55PUS8601/12, Руководство по обслуживанию

Страница: 18 / 129

Mechanical Instructions EN 18 QM15.1E LA 4.
2016-May-09
back to
div.table
4.3.3 Removing the Backcover 8901 series
Procedure
1.
Disconnect the mains power cord.
2. Remove fixation screws that secure the backcover. Refer
to
Figure 4-15 .
3. Remove the backcover from the TV set. Make sure not to
damage the AmbiLight Projection module, wires or cables.
Figure 4-15 Backcover Screw Location 8901 series 65”
4.3.4 Mounting the Backcover 8901 series
Procedure
1.
Put the Backcover on the Display Panel.
2. Insert the fixation screws, as indicated in Figure 4-15 , in
the following order:
a.
Insert screws 1 and 2 hand tight, align the Backcover
with the Display corners and tighten the screws.
b. Insert screw 3 at the bottom side, align the Backcover
with the Display bottom and tighten the screw.
c. Insert and tighten screws 4 to 9.
d. Insert and tighten screws 10 to 13.
e. Insert and tighten all other screws.
4.3.5 Keyboard Control unit 8601 series
1. Unplug the AmbiLight FFC connectors [1] and 13 pins
connector [2] from the keyboard control panel.
2. Remove the fixation screws that secure the keyboard.
3. Gently take out the keyboard. Refer to Figure 4-16 .
4. When defective, replace the entire unit.
Figure 4-16 Keyboard removal
1 5 4 6 7 8 9 2
10
11
12
13
3
10
11
12
13
19800_030_151030.eps
15-10-30
1
1
2