Mechanical Instructions
4.
4.3.7
Removing the AmbiLight Projection Module 8901 series
Refer to
for details.
1.
Disconnect Power Cable 8P9 from the AmbiLight driver
board.
2.
Disconnect the keyboard cable and the SSB cable from the
AmbiLight driver board.
3.
Remove the six screws at positions 3 and 4 that fix the
module on the Display Panel.
4.
Remove the AmbiLight Projection module.
Make sure not to damage wires and flat foil cables while
lifting it.
4.3.8
Mounting the AmbiLight Projection Module 8901 series
Refer to
for details.
1.
Put the AmbiLight Projection module on the Display Panel.
Keep wires and flat foil cables correctly routed and make
sure they won’t get clamped at the screw positions 3 and 4.
2.
Insert two screws at positions 3 hand tight, align the
module and tighten the screws.
3.
Insert the other four screws at positions 4 and tighten.
4.
Connect the cables (2) for keyboard and SSB to the
AmbiLight driver board.
5.
Connect Power Cable 8P9 (1) to the AmbiLight driver
board.
Figure 4-18 Mounting AmbiLight Projection Module 8901 series
19992_005_151211.eps
15-12-11
3
3
4
1
2
SSB
8P9
Keyboard
4
4
4
Screws M3×5: 6x to panel
