17
Software
17.1
Update Software
Update from Internet
If the display is connected to the Internet, you may
receive a message to update the software. You need
a high-speed (broadband) Internet connection. If
you receive this message, we recommend you to
carry out the update.
With the message on screen, select
Update
and
follow the instructions on-screen.
You can also look for a software update yourself.
During the software update, there is no picture and
the display will switch off and on again. This might
happen several times. The update can take a few
minutes. Wait until the picture comes back up. Do not
press the power switch
on the display or on the
remote control during the software update.
To look for a software update yourself…
1 -
Select
Settings
>
Update Software
>
Search
for Updates
and press
OK
.
2 -
Select
Internet (recommended)
and press
OK
.
3 -
The display will look for an update on the
Internet.
4 -
If an update is available, you can update the
software right away.
5 -
A software update can take several minutes. Do
not press the
key on the display or remote
control.
6 -
When the update is done, the display will return
to the programmeyou were watching.
Update from USB
It might be necessary to update the software.
You need a computer with an high-speed Internet
connection and a USB flash drive to upload the
software on the display. Use a USB flash drive with at
least 2Gb free space. Make sure that write protection
is switched off.
To update the software…
1 -
Select
Settings
>
Update Software
>
Search
for Updates
and press
OK
.
2 -
Select
USB
and press
OK
.
Identify the display
1 -
Insert the USB flash drive into one of the USB
connections of the display.
2 -
Select
Write to USB
and press
OK
. An
identification file is written on the USB flash drive.
Download the software
1 -
Insert the USB flash drive into your computer.
2 -
On the USB flash drive, locate the
file
update.htm
and double click it.
3 -
Click
Send ID
.
4 -
If new software is available, download the .zip
file.
5 -
After the download, unzip the file and copy the
file
autorun.upg
onto the USB flash drive. Do not
place this file in a folder.
Update the software
1 -
Insert the USB flash drive into the display again.
The update starts automatically.
2 -
A software update can take several minutes. Do
not press the
key on the display or remote
control. Do not remove the USB flash drive.
3 -
When the update is done, the display will return
to the programme you were watching.
If a power cut occurs during the update, never
remove the USB flash drive from the display. When
the power returns, the update will continue.
To prevent an accidental update of the software,
delete the autorun.upg file from the USB flash drive.
17.2
Software Version
To view the current software version…
1 -
Select
Settings > Update Software
>
Current
Software info
, and press
OK
.
2 -
The version, release notes and creation date are
shown. Also, the Netflix ESN Number is shown if
available.
3 -
Press
(left) repeatedly if necessary, to close
the menu.
17.3
Automatic Software Update
To switch on Automatic software update to update
your display's software automatically. Leave the
display in standby.
1 -
Select
Settings
>
Update
Software
>
Automatic Software Update
>
On
, and
press
OK
.
2 -
Follow the on-screen instruction.
3 -
Press
(left) repeatedly if necessary, to close
the menu.
When the setting is enabled, the upgrade gets
downloaded when the display is powered ON and
installed 15min after the display has gone to standby
(as long as there are no alarms scheduled).
When the setting is disabled, the "Upgrade Now" /
46
Содержание 50PUH8217
Страница 62: ...Powered by TCPDF www tcpdf org ...
