When the DTS Play-Fi compatible device is
configured correctly and switched on, you can select
Play-Fi Wireless Home Theater
to set it as audio out
device.
eARC
Settings > Sound > Advanced > eARC.
Set eARC mode to
Automatic
or
Off
.
Digital Output Settings
Digital output settings are available for optical and
HDMI ARC sound signals.
Digital out format
Settings > Sound > Advanced > Digital out
format.
Set the audio out signal of the display to fit the sound
capabilities of the connected Home Theatre System.
•
Stereo (uncompressed)
: If your audio playback
devices have no multichannel sound processing,
select to only output stereo content to your audio
playback devices.
•
Multichannel
: Select to output multichannel audio
content (compressed multichannel sound signal) or
stereo audio content to your audio playback devices.
•
Multichannel (bypass
): Select to output Dolby
Digital Plus or DTS content to your audio playback
devices or Home theatre system.
- Make sure your audio playback devices support
Dolby Atmos feature.
- SPDIF output (DIGITAL AUDIO OUT) will be
disabled when streaming Dolby Digital Plus content.
Digital out levelling
Settings > Sound > Advanced > Digital out
levelling.
Adjust the loudness level from device which is
connected to digital audio output (SPDIF) or HDMI.
• Select More to have louder volume.
• Select Less to have softer volume.
Digital out delay
Settings > Sound > Advanced > Digital out
delay.
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio
to the video. Select Off if a sound delay is set on
your Home Theatre System.
Digital out offset (Only available when Digital out
delay set to On)
Settings > Sound > Advanced > Digital out
offset.
If you cannot set a delay on the Home Theatre
System, you can set the display to sync the sound.
You can set an offset that compensates for the time
necessary for the Home Theatre System to process
the sound of the picture. You can set the value in
steps of 5ms. Maximum setting is 60ms.
Dolby Atmos Notification
Settings > Sound > Dolby Atmos notification.
Switch
On
or
Off
the Dolby Atmos notification when
Dolby Atmos content begins to play on your display.
11.3
Eco Settings
Set screen off to save energy consumption
Quick Menu > Frequent Settings > Screen off.
Select Screen off, the display screen is switched off,
to switch the screen back on, press any key on the
remote control.
Switch on built-in ambient light sensor
Settings > Eco settings > Light sensor.
Select Light sensor, the built-in ambient light sensor
lowers the brightness of the screen when the
surrounding light darkens. The built-in light sensor
automatically adjusts the picture, to the lighting
conditions of the room.
Set the switch off timer
Settings > Eco settings > Switch off timer.
Press the arrows
(up) or
(down) to adjust the
value. The value 0 (Off) deactivates the automatic
switch off.
Select Switch off timer, the display switches off
automatically to save energy.
* The display switches off if receiving signals but you
don't press a key on the remote control during a 4
hour period.
* The display switches off if not receiving signals nor a
remote control command for 10 minutes.
* If you use the device as a monitor or use a digital
receiver to watch programme (a Set-Top Box - STB)
and you do not use the remote control of the display,
34
Содержание 50PUH8217
Страница 62: ...Powered by TCPDF www tcpdf org ...
