Philips 50PUH8217, Руководство пользователя

Страница: 11 / 62

4
Switching On and
Off
4.1
On or Standby
Make sure the display is connected to the mains AC
power. Connect the supplied power cord to the
AC
in connector at the back of the display. The indicator
light at the bottom of the display lights up.
Switch on
Press  on the remote control to switch the display
on. Alternatively, press  HOME . You can also
press the small joystick key on the bottom of
the display to switch the display on in case you
can't find the remote control or its batteries are
empty.
Switch to standby
To switch the display to standby, press  on the
remote control. You can also press the small joystick
key on the bottom of the display.
In standby mode, the display is still connected to the
mains power but consumes very little energy.
To switch off the display completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
4.2
Keys on display
If you lost the remote control or its batteries are
empty, you can still do some basic operations.
To open the basic menu…
1 - With the display switched on, press the joystick
key on the bottom of the display to bring up the
basic menu.
2 - Press left or right to select  Volume or 
Sources . Select  Demo , to start a demo movie.
3 - Press up or down to adjust the volume or go
through the list of sources. Press the joystick key to
start the demo movie.
4 - The menu will disappear automatically.
To switch the display on standby, select  and
press the joystick key.
11