Channels
No
digital
channels
found
during
the
installation
See the technical specifications to make sure that
your TV supports DVB-T or DVB-C in your country.
Make sure that all cables are properly connected and
that the correct network is selected.
Previously
installed
channels
are
not
in
the
channel
list
Make
sure
that
the
correct
channel
list
is
selected
.
Picture
No
picture
/
distorted
picture
-
Make sure that the antenna is properly connected
to the TV.
-
Make sure that the correct device is selected as the
display source.
-
Make sure that the external device or source is
properly connected.
Sound
but
no
picture
-
Make sure that the antenna is properly connected
to the TV.
-
Loud speakers, unearthed audio devices, neon
lights, high buildings and other large objects can
influence reception quality. If possible, try to improve
the reception quality by changing the antenna
direction or moving devices away from the TV.
-
If reception on only one channel is poor, fine-tune
this channel with Manual Installation.
-
Make
sure
that
the
picture
settings
are
set
correctly
.
Poor
antenna
reception
Poor
picture
from
a
device
-
Make sure that the device is connected properly.
-
Make sure that the picture settings are set correctly.
Picture
settings
change
after
a
while
-
Make
sure
that
Location
is
set
to
Home
.
You
can
change
and
save
settings
in
this
mode
.
A
commercial
banner
appears
-
Make
sure
that
Location
is set to
Home.
Picture
does
not
fit
the
screen
-
Change
to
a
different
picture
format
.
Picture
format
keeps
changing
with
different
channels
-
Select
a
non
'
Auto
'
picture
format
.
Picture
position
is
incorrect
-
Picture signals from some devices may not fit the
screen correctly. Check the signal output of the
connected device.
Computer
picture
is
not
stable
-
Make sure that your PC uses the supported
resolution and refresh rate.
Sound
No
sound
or
poor
sound
quality
If no audio signal is detected, the TV automatically
switches the audio output off — this does not indicate
malfunction.
-
Make sure that the sound settings are correctly set.
-
Make sure that all cables are properly connected.
-
Make sure that the volume is not muted or set to
zero.
-
Make sure that the TV audio output is connected to
the audio input on the Home Theatre System.
-
Sound should be heard from the HTS speakers.
-
Some devices may require you to manually enable
HDMI audio output. If HDMI audio is already enabled,
but you still do not hear audio, try changing the digital
audio format of the device to PCM (Pulse Code
Modulation). Refer to the documentation
accompanying your device for instructions.
HDMI
HDMI
-
Note that HDCP (High-bandwidth Digital Content
Protection) support can delay the time taken for a TV
to display content from an HDMI device.
-
If the TV does not recognise the HDMI device and
no picture is displayed, switch the source from one
device to another and back again.
-
If there are intermittent sound disruptions, make
sure that output settings from the HDMI device are
correct.
-
If you use an HDMI-to-DVI adapter or HDMI-to-
DVI cable, make sure that an additional audio cable is
connected to AUDIO IN (mini-jack only), if available.
EasyLink
does
not
work
-
Make sure that your HDMI devices are HDMI-CEC
compatible. EasyLink features only work with devices
that are HDMI-CEC compatible.
No
volume
icon
shown
-
When
a
HDMI
-
CEC
audio
device
is
connected
this
behaviour
is
normal
.
20
Содержание 43PFS4062/60
Страница 32: ...Powered by TCPDF www tcpdf org 2018 ...