In some countries, different TV channels (broadcasters) might
have the same channel number. While installing, the TV
shows the list with channel number conflicts. You need to
select which TV channel you want to install on a channel
number with multiple TV channels.
DVB-T + DVB-C
If you can use a DVB-T antenna input but also a DVB-C input,
you can set up your TV for both DVB-T and DVB-C. Install one
system followed by the other with the necessary settings.
Once each system is installed, you need to switch the antenna
input signal on the
Antenna
connection on the back of the TV
and set the TV in the appropriate system to view the installed
channels on TV.
To select the DVB-T or DVB-C setting, see above.
DVB settings
Symbol rate mode
If your cable provider did not give you a specific
symbol rate
value to install the TV channels, leave the
Symbol rate mode
setting on
Automatic
.
If you received a specific symbol rate value, select
Manual
.
However, the value you received could be in the predefined
list of symbol rates already. Select
Predefined symbol rates
to
check if your value is available automatically.
Predefined symbol rates
With the
Symbol rate mode
set to
Automatic
, the TV will
use 1 of the predefined symbol rates as used by most cable
providers in your country.
Symbol rate 1
With the
Symbol rate mode
set to
Manual
, you can enter the
symbol rate value you received from your cable provider. To
enter the value, use the number keys.
Symbol rate 2
With the
Symbol rate mode
set to
Manual
, you can enter a
second symbol rate value you received from your cable
provider. To enter the value, use the number keys.
Network frequency mode
If you intent to use the fast
Quick scan
method in
Frequency
scan
to search for channels, select
Automatic
. The TV will use
1 of the predefined network frequencies (or HC - homing
channel) as used by most cable providers in your country.
If you received a specific network frequency value to search for
channels, select
Manual
.
Network frequency
With the
Network frequency mode
set to
Manual
, you can
enter here the network frequency value received from your
cable provider. To enter the value, use the number keys.
Frequency scan
Select the method of searching for channels. You can select
the faster
Quick scan
method and use the predefined settings
used by most cable providers in your country.
If this results in having no channels installed or if some
channels are missing, you can select the extended
Full scan
method. This method will take more time to search for and
install channels.
Frequency step size
The TV searches for channels in steps of
8MHz
.
If this results in having no channels installed or if some
channels are missing, you can search in smaller steps of
1MHz
.
Using the 1MHz steps will take more time to search for and
install channels.
Digital channels
If you know your cable provider is not offering digital channels,
you can skip searching for digital channels.
Select
Off
.
Analogue channels
If you know your cable provider is not offering analogue
channels, you can skip searching for analogue channels.
Select
Off
.
Free / Scrambled
If you have a subscription and a CAM - Conditional Access
Module for pay TV services, select
Free + scrambled
. If you
did not subscribe to pay TV channels or services, you can
select
Free channels
only.
In
Help
, press
*
List
and look up
CAM - Conditional Acces
Module
for more information.
Reception quality
If you receive digital channels, you can check the quality and
signal strength of a channel.
If you have your own antenna, you can reposition the antenna
to try and improve the reception.
To check the reception quality of a digital channel, switch to
the channel.
Press
h
, select
S
Setup
and press
OK
.
Select
Channel settings
and press
OK
. Select
Channel
installation
>
Digital : reception test
and press
OK
.
30
TV / TV channels
