Philips 40PFL8008, Руководство пользователя

Страница: 31 / 83

The digital frequency is shown for this channel. If the reception
is poor, you can reposition your antenna. To check the signal
quality of this frequency again, select Search and press OK .
To enter a specific digital frequency yourself, use the remote
control digit keys. Alternatively, select the frequency, position
the arrows on a number with
w
and
x
and change the number
with u and v . To check the frequency, select Search and
press
OK
.
If you use DVB-C to receive channels, the options
Symbol rate
mode and Predefined symbol rates are available. For Symbol
rate mode, select
Automatic
, unless your cable provider gave
you a specific symbol rate value. To enter the symbol rate
value, use the number keys.
Manual installation
Analogue TV channels can be manually installed, channel by
channel.
To install analogue channels manually, press h , select S
Setup
and press
OK
.
Select Channel settings and press OK .
Select
Channel installation
>
Analogue : manual installation
and press OK .
1 - System
To set up the TV system, select System and press OK .
Select your country or the part of the world where you are
now.
2 - Find channel
To find a channel, select Find channel and press OK . Select
Search and press OK . You can also enter a frequency yourself.
If the reception is poor, press Search again. If you want to store
the channel, select
Done
and press
OK
.
3 - Fine tune
To fine tune a channel, select
Fine tune
and press
OK
. You
can fine tune the channel with u or v .
If you want to store the channel found, select
Done
and press
OK .
4 - Store
You can store the channel on the current channel number or
as a new channel number.
Select Store current channel or Store as new channel .
You can redo these steps until you found all available analogue
TV channels.
Picture format
If black bars appear on top and bottom or on both sides of the
picture, you can adjust the picture format to a format that fills
the screen.
While watching a TV channel, press f FORMAT to open
the
Picture format
menu.
Select a format from the list and press OK .
Picture formats
The following formats are available according to the picture on
screen:
• Auto fill
Automatically enlarges the picture to fill the screen. Picture
distortion is minimal, subtitles remain visible. Not suitable for
PC input. Some extreme picture formats can still show black
bars.
• Auto zoom
Automatically zooms in the picture to fill the screen as much
as possible without distortion. Black bars may be visible. Not
suitable for PC input.
• Super zoom
Removes the black bars on the side of 4:3 broadcasts. The
picture is adjusted to fit the screen.
• Movie expand 16:9
Scales the picture to a 16:9 format.
• Wide screen
Stretches the picture to a 16:9 format.
• Unscaled
Expert mode for HD or PC input. Pixel for pixel display. Black
bars may appear with pictures from a computer.
Text
Text pages
Open Text
To open Text while you are watching TV channels, press
TEXT
.
To close Text, press TEXT again.
Select a Text page
To select a page …
• Enter the page number with the number keys.
•
Press
w
or
x
• Press u or v .
•
Press a colour key to select a colour-coded subject at the
bottom of the screen.
Text sub-pages
A Text page number can hold several subpages. The subpage
numbers are shown on a bar next to the main page number.
To select a subpage, press
w
or
x
.
T.O.P. Text pages
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text, press o OPTIONS
and select T.O.P. overview .
Favourite pages
TV / TV channels 31