Service Modes, Error Codes, and Fault Finding
5.
corruption, this identification number has to be re-written to
NVM. This identification number is the 12NC number of the
SSB.
•
1.6 18AC Display
18NC NVM read/write.
•
1.7 18AC Supply
18AC NVM read/write.
•
1.8 18AC sensor board
18AC NVM read/write.
•
2.1 Current Main SW
Displays the built-in main software
version. In case of field problems related to software,
software can be upgraded. As this software is consumer
upgradeable, it will also be published on the internet.
•
2.2 Standby Software
Displays the built-in stand-by
processor software version. Upgrading this software will be
possible via USB.
•
2.3 e-UM version
eDFU (help) version.
•
2.4 Strings database version
Displays the version of
strings database.
•
2.10 Channel package version
version of channel
package.
•
3.1 Signal Quality
Analog/digital signal strength.
•
3.4 Ethernet MAC address
A Media Access Control
address (MAC address) is a unique identifier assigned to
network interfaces for communications on the physical
network segment.
•
3.5 Wireless MAC address
Wireless Media Access
Control address.
•
3.6 Netflix key
Indicates the validity of the netflix key. In
case this key are not valid and the customer wants to make
use of the functionality, the SSB has to be replaced.
•
3.7 CI module
Indicates the module of CI.
•
3.8 CI+ protected service
The IC+ protectd service.
•
3.9 Event counter
The counter of event.
How to Navigate
By means of the “CURSOR-DOWN/UP” knob (or the scroll
wheel) on the RC-transmitter, can be navigated through the
menus.
How to Exit CSM
To exit CSM, use one of the following methods.
•
Press the MENU/HOME button on the remote control
transmitter.
•
Press the POWER button on the remote control
transmitter.
•
Press the POWER button on the television set.
5.3
Stepwise Start-up
Figure 5-1 Stepwise Start-up
19080_206_110323.eps
120224
Power Off
Standby
Soft Mode
Power On
Semi-
Standby
Standby
Switch
Off(Mains
Power Plug)
Standby Soft Mode
Command Received,
previously in Standby
Soft Mode (Power tact
switch)
TV Wakeup
commands
Received
(TV Wakeup
keys)
Digital
background
tasks started
Digital
background
tasks completed
Swith On,
previously in
Standby/Semi-
Standby (Mains
Power Plug)
Standby
Soft Mode
Command
Received
(Power tact
switch)
Switch Off (Mains
Power Plug)
Switch Off
(Mains Power
Plug)
Swith On,
previously in
Standby Soft Mode
(Mains Power Plug)
Standby
commands
Received (RC
Standby key)
Standby Soft Mode
Command Received,
previously in Standby
Soft Mode (Power
tact switch)
TV Wakeup
commands
Received
(TV Wakeup
keys)
Switch On, previously
in Power On Mode
(Power tact switch)
Standby Soft Mode
Command Received,
(Power tact switch)
Switch Off (Mains
Power Plug)
Switch On,previously in
TV Operation Mode
(Mains Power Plug)