Mechanical Instructions
4.
4.2
Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and
never
only the
display.
Caution:
Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.3
Assembly/Panel Removal (for
32"/39"/40"/55"Pxx5500 series &
40"/50"/55"Pxx6400 series)
Instructions below apply to the 40PFT5500/12, but will be
similar for other 32"/39"/40"/55"Pxx5500 &
40"/50"/55"Pxx6400 series models.
4.3.1
Rear Cover
for details.
Warning:
Disconnect the mains power cord before removing
the rear cover.
1. Remove fixation screws [1] that secure the base assy, pull
out the base assy from the set. Refer to
for
details.
2. Remove the fixation screws [2], [3] and [4] that secure the
rear cover. Refer to
for details.
3. Unplug the connector [5] from SSB. Refer to
for details.
4. Gently lift the rear cover from the TV. Make sure that wires
and cables are not damaged while lifting the rear cover
from the set.
Figure 4-16 Rear cover removal[1]
Figure 4-17 Rear cover removal[2]
19880_104.eps
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
3
4
4
3
1
M4 × 12
M3× 8
2
M3 × 6
Q3 × 6
3
19880_106.eps
5
