7
Channels
7.1
About Channels and Switch
Channels
To watch TV channels
• Press
. The TV tunes to the TV channel you last
watched.
• Press
(Home)
>
TV > Channels
then
press
OK
.
• Press
or
to switch channels.
• If you know the channel number, type in the number
with the number keys. Press
OK
after you entered
the number to switch channels.
• To switch back to the previously tuned channel,
press
BACK
.
To switch to a channel from a channel list
• While watching a TV channel, press
OK
to open the
channel lists.
• The channel list may have several pages with
channels. To view the next or previous page,
press
or
.
• To close the channel lists without switching
channels, press
BACK
or
EXIT
.
Channel icons
After an Automatic channel update of the channel list,
newly found channels are marked with a
(star).
If you lock a channel, it will be marked with
a
(lock).
Radio channels
If digital broadcasting is available, digital radio
stations are installed during installation. Switch to a
radio channel just like you switch to a TV channel.
The TV may not work properly with some digital
television operators that are non-compliant with the
full requirements of the standard.
7.2
Install Channel
Antenna/Cable Installation
Search for Channels
Update channels
(Home)
>
Settings
>
Install
Channels
>
Antenna/Cable Installation
>
Search
for channels
1 -
Select
Start now
and press
OK
.
2 -
Select
Update channels
to only add new digital
channels.
3 -
Select
Start
and press
OK
to update channels.
This can take a few minutes.
Quick reinstall
(Home)
>
Settings
>
Install
Channels
>
Antenna/Cable Installation
>
Search
for channels
1 -
Select
Start now
and press
OK
.
2 -
Select
Quick reinstall
to install all channels again
with default settings.
3 -
Select
Start
and press
OK
to update channels.
This can take a few minutes.
Advanced reinstall
(Home)
>
Settings
>
Install
Channels
>
Antenna/Cable Installation
>
Search
for channels
1 -
Select
Start now
and press
OK
.
2 -
Select
Advanced reinstall
to do a full re-
installation which takes you through each step.
3 -
Select
Start
and press
OK
to update channels.
This can take a few minutes.
Service Navigation
(Home)
>
Settings
>
Install
Channels
>
Antenna/Cable Installation
>
Service
navigation
• If the Service navigation is set to
On
, you can
browse the primary and secondary channels by
pressing channel
and
.
• If the Service navigation is set to
Off
, you can only
browse the primary channels using
channel
and
.
Digital: Reception Test
(Home)
>
Settings
>
Install
channels
>
Antenna/cable installation
>
Digital:
reception test
The channel number is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this channel again,
select
Search
and press
OK
.
To enter a specific channel number yourself, use the
remote control digit keys. Alternatively, change the
number with
and
. To check again,
select
Search
and press
OK
.
Antenna Connection
(Home)
>
Settings
>
Install
Channels
>
Antenna/Cable Installation
> Antenna
Connection
16
