Copy a Channel List, Check Channel List Version
To copy a channel list…
1. Switch on the TV. This TV should have channels
installed.
2. Plug in a USB flash drive.
3. Press
(Home)
>
Settings
>
General
settings
>
Channel list copy
.
4. Select
Copy to USB
and press
OK
. You might be
asked to enter the Child Lock PIN code to copy the
channel list.
5. When copying is done, unplug the USB flash drive.
6. Press
(left) repeatedly if necessary, to close the
menu.
Now you can upload the copied channel list onto
another Philips TV.
Check the current version of the channel list...
1. Press
(Home)
>
Settings
>
General
settings
>
Channel list copy
.
2. Select
Channel list copy
and select
Current
version
, then press
OK
.
3. Press
(left) repeatedly if necessary, to close the
menu.
Upload a Channel List
To TVs that are not installed
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To a TV that is not yet installed
1. Plug in the power plug to start the installation and
select language and country. You can skip the
channel search. Finish the installation.
2. Plug in the USB flash drive that holds the channel
list of the other TV.
3. To start the channel list upload,
press
(Home)
>
Settings
>
General settings
>
Channel list copy
>
Copy to TV
and press
OK
.
Enter your PIN code if necessary.
4. The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
To Installed TVs
Depending on whether your TV is already installed or
not, you must use a different method to upload a
channel list.
To an already installed TV
1. Verify the country setting of the TV. (To verify this
setting, see chapter
Re-install channels
. Start this
procedure until you reach the country setting.
Press
BACK
to cancel the installation.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a
reinstallation. See chapter
Re-install channels
and
start the installation. Select the correct country and
skip the channels search. Finish the installation. When
done, continue with step 2.
2. Plug in the USB flash drive that holds the channel
list of the other TV.
3. To start the channel list upload,
press
(Home)
>
Settings
>
General
settings
>
Channel list copy
>
Copy to TV
and
press
OK
. Enter your PIN code if necessary.
4. The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB flash drive.
Channel Options
Open Options
While watching a channel, you can set some options.
Depending on the type of channel you are watching
(analog or digital) or depending on your TV settings,
some options are available.
To open the options menu…
1. While watching a channel, press
OPTIONS
.
2. Press
OPTIONS
again to close.
Closed Caption
Switch
Closed Caption
On
or
Off
with this options.
Select
On During Mute
to show closed captions
only when the sound is muted with
.
Caption Service
Select the correct type of closed-caption services.
Alternate Audio
If you have selected
Alternate Audio
for analog
channels, select between:
-
Main
: Primary audio language or
-
SAP
: Secondary audio language
14
