manualshive.com logo in svg

Philips 202P70, Электронное руководство пользователя, Страница: 66 / 142

Поделиться
Скачать
Philips 202P70 Скачать руководство пользователя страница 66

Regulatory Information

 

TCO' 03 Information (For TCO Model Only)

Congratulations!

The display you have just purchased carries the TCO'03 
Displays label. This means that your display is designed, 
manufactured and tested according to some of the strictest 
quality and environmental requirements in the world. This 
makes for a high performance product, designed with the  
user in focus that also minimizes the impact on our natural 
environment.

 

Some of the features of the TCO'03 Display requirements.

 

Ergonomics

●

     

Good visual ergonomics and image quality in order to improve the working environment 
for the user and to reduce sight and strain problems. Important parameters are luminance, 
contrast, resolution, reflectance, colour rendition and image stability.

Energy

●

     

Energy-saving mode after a certain time-beneficial both for the user and the environment

●

     

Electrical safety

Emissions

●

     

Electromagnetic fields

●

     

Noise emissions

Ecology

●

     

The product must be prepared for recycling and the manufacturer must have a certified 

file:///D|/EDFU/crt_19_6/edoc/english/202P/SAFETY/regs/regulat.htm (4 of 16)2005-08-10 ¤U¤È 01:05:34

Содержание 202P70















































































































































Отзывы:

Нет отзывов