manualshive.com logo in svg

Philips 202P70, Электронное руководство пользователя, Страница: 23 / 142

Поделиться
Скачать
Philips 202P70 Скачать руководство пользователя страница 23

Frequently Asked Questions

TCO95: Further toughened TCO92 rules. 
TCO99: Delineated even more severe standards and test procedures than TCO95.

 

TCO'03: Same as TCO99 st Testing uncertainty.

 

Safety:

 

MPRII: No requirement. 
TCO92/95/99/03: All set requirements.

  

Energy Saving:

 

MPRII: No requirement. 
TCO92: Standby mode < 30W, Off mode < 8W 
TCO95: Standby mode < 30W, Off mode < 8W 
TCO99: Standby mode < 15W, Off mode < 5W

 

TCO'03:Standby mode < 15W, Off mode < 5W

  

Visual Ergonomics:

 

MPRII: No requirement. 
TCO92: No requirement. 
TCO95: Set ergonomic rules including minimum contrast level, flicker and jitter. 
TCO99: Tightened TCO95 rules. 
TCO'03: Tighten TCO99 rule for CRT and new requirement of screen color for TFT LCD 
Monitors.

  

Ecology:

 

MPRII: No requirement. 
TCO92: No requirement. 
TCO95: Set general ecological standards including recycling preparation, environmental 
policy and environmental certification. 
TCO99: Further tightened TCO95 norms. 
TCO'03:Require the recycling information to users.

 

 

file:///D|/EDFU/crt_19_6/edoc/english/FAQ.HTM (3 of 15)2005-08-10 ¤U¤È 01:05:20

Содержание 202P70















































































































































Отзывы:

Нет отзывов