Philips 202P70 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 142

Philips 202P70 Скачать руководство пользователя страница 2

Safety & Troubleshooting

Safety and Troubleshooting Information

Safety Precautions and Maintenance

Troubleshooting

Regulatory Information

Related Information

Safety precautions and maintenance

WARNING: Use of controls, adjustments, or procedures other than those
specified in this documentation may result in exposure to shock, electrical
hazards, and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor:

●

Disconnect the monitor from the power supply if the monitor is not to be used for an
extended period of time.

●

Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The
back cover should only be removed by qualified service personnel.

●

Do not place objects on top of the monitor cabinet, objects could fall into vents or cover them
and prevent proper cooling of the monitor's electronic devices.

●

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain
or excessive moisture.

●

Do not use alcohol or ammonia-based liquid to clean the monitor. If necessary, clean with a
slightly damp cloth. Disconnect the monitor from the power supply before cleaning.

●

When positioning the monitor, make sure the power plug and outlet are easily accessible.

Consult a service technician if the monitor does not operate normally when operating instructions of
this manual are followed.

RETURN TO TOP OF THE PAGE

file:///D|/EDFU/crt_19_6/edoc/english/202P/SAFETY/safety.htm2005-08-10 ¤U¤È 01:05:16

«
1
2
3
4
...
»

Содержание 202P70















































































































































Отзывы:

Нет отзывов