manualshive.com logo in svg

Philips 202P70, Электронное руководство пользователя, Страница: 4 / 142

Поделиться
Скачать
Philips 202P70 Скачать руководство пользователя страница 4

About This Electronic User's Manual

 

RETURN TO TOP OF THE PAGE

Notational Descriptions

The following subsections describe notational conventions used in this document. 

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in 
italic type. These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: This icon indicates important information and tips that help you make 
better use of your computer system.

CAUTION: This icon indicates information that tells you how to avoid either 
potential damage to hardware or loss of data.

WARNING: This icon indicates the potential for bodily harm and tells you how 
to avoid the problem.

SMART HELP: This icon indicates helpful information when adjusting the On 
Screen Display of your monitor.

 

Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such 
cases, the specific presentation of the warning is mandated by regulatory authority.

 

RETURN TO TOP OF THE PAGE

file:///D|/EDFU/crt_19_6/edoc/english/202P/ABOUT/ABOUT.HTM (2 of 3)2005-08-10 ¤U¤È 01:05:16

Содержание 202P70















































































































































Отзывы:

Нет отзывов