Philips 202P70 Скачать руководство пользователя страница 141

It Takes Only A Moment To

PROTECT YOUR INVESTMENT.

Congratulations on investing in a Philips product. It’s an important and intelligent decision that’s sure to reward you
for many years to come. To ensure you’ll get all of the privileges and protection that come with your purchase,
please complete your Warranty Registration Card within the next ten days.

SIMPLY MAIL THE CARD BELOW TO RECEIVE ALL 

OF THESE BENEFITS TO WHICH YOU’RE ENTITLED.           

WARRANTY VERIFICATION

Your prompt registration verifies your right to protection 

under the terms and conditions of your warranty.

OWNER CONFIRMATION

Your completed Warranty Registration Card serves as confirmation 

of ownership in the event of product loss or theft.

MODEL REGISTRATION

Returning the attached card right away guarantees you’ll receive 

all information and special offers for which your purchase makes you eligible. So please act today!

w w w . p h i l i p s u s a . c o m

D E T A C H   A N D   M A I L   P O R T I O N   B E L O W .

3135 015 07803

rev. 7/02

Mail This Card Today To Get The Most From Your Purchase!

No, I do not want to receive personalized offers about Philips products or other information from Philips in the future.

Registering your product is an essential step to ensure that you receive all of the benefits you are entitled to as a

Philips customer. So complete the information below in ink, and drop this card in the nearest mailbox.

WARRANTY

REGISTRATION CARD

IMPORTANT - RETURN WITHIN TEN DAYS

Month

Day

Year

PHILIPS Warranty Card   8/16/02  12:38 PM  Page 1

Содержание 202P70















































































































































Отзывы: