Philips 2000 PURO/VAPORE, Руководство по обслуживанию

Страница: 19 / 67

PHI 2000 PURO/VAPORE 03 BRIEF INSTRUCTIONS
3/9
Problem Solution
The machine does not work.
Make sure the small plug is inserted into the socket. Plug in and
switch on the machine.
Make sure that the voltage indicated on the machine corre-
sponds to the local mains voltage.
The machine is stuck in the
descaling procedure.
Press the on/off button. You can restart the descaling proce-
dure.
The coffee is not hot enough. Preheat the cups. Use thin-walled cups.
The espresso does not have
enough crema.
Use a different type of coffee beans or adjust the ceramic coffee
grinder.
The brewing unit cannot be re-
moved.
Remove the coffee grounds container before you open the
maintenance door. If you still cannot remove the brewing unit
follow the next steps. Reinsert the coffee grounds container, clo -
se the maintenance door, switch on the machine. The machine
prepares for use. Switch off the machine and try to remove the
brewing unit again.
The brewing unit cannot be
placed back.
Make sure that the lever is in contact with the base of the
brewing unit. Also make sure that the hook of the brewing unit
is in the correct position.
If you still cannot place the brewing unit back.Reinsert the cof-
fee grounds container and leave the brewing unit out. Close the
maintenance door, switch on the machine. The machine pre -
pares for use. Switch off the machine and try to place back the
brewing unit again.
The machine grinds the coffee
beans but no coffee comes out
(see note).
Clean the coffee exit duct and set the grinder to a coarser set-
ting. Clean the brewing unit.
Fill the water tank with water.
Clean the coffee spout.
The coffee is too weak (see
note).
Adjust the ceramic coffee grinder to a finer setting.
Brew a few cups of coffee to let the machine adjust itself to the
new grinding settings.
Use a different type of coffee beans.