Philips 2000 PURO/VAPORE, Руководство по обслуживанию

Страница: 15 / 67

PHI 2000 PURO/VAPORE 02 TECHNICAL SPECIFICATION
5/5
2.4. Machine parameters and performance
PRODUCT
QUANTITY
Minimum
amount
(Puls.)
Default
amount
(Puls.)
Maximum
amount
(Puls.)
Programm.
by the user
Programm. by Pro-
duction / Service
Espresso
button
70 165 600 Yes No
Regular
coffee
button
70 440 600 Yes No
Hot water
Continues until the water supply has been exhausted (capacitive sensor)
Steam for
frother
Continues until the water supply has been exhausted (capacitive sensor)
RINSE Initial rinse Final rinse
When performed It is activated when the ma-
chine is in Power-Off for more
than 15 minutes
When the machine is switched off
electronically, manually or auto -
matically after 30minutes, if at
least one coffee has been dis-
pensed, before switching off
No. of pulses 150 80
Stopping option Yes, by pressing any key Yes, by pressing any key
User disable option No No
Production/Service depart-
ment disable option
No No
No. of pulses user adjust-
ment option
No No
No. of pulses Production/
Service department adjust-
ment option
No No
Pulse range
(Min. - Max.)
No No
Descaling cycle frequency
Hard-
ness
Water hardness Without water filter With water filter
1 Soft (up to 7°dH) 240 litres (480,000 pulses) 480 litres (960,000 pulses)
2 Medium (7° - 14°dH) 120 litres (240,000 pulses) 240 litres (480,000 pulses)
3
Hard (15° - 21°dH) 60 litres (120,000 pulses) 120 litres (240,000 pulses)
4 Very hard (over 21°dH) 30 litres (60,000 pulses) 60 litres (120,000 pulses)
The default water hardness level is 4. Each litre of water corresponds to approximately
2,000 pulses.
In the machines where is not possible change the water hardness the default
hardness level is 3.