Battery-Monitor BLS
REV 1A – APR 2019 - Software Version 1A
page 14
"Battery empty"
the battery is completely discharged and all consumers must be shut down
and the charge must be promptly initiated to prevent further damage to
the battery
"Temperature"
the battery temperature is out of range
The charge screen shows the operating status of the
active philippi charger ACE. If the charger ACE is
disconnected from the mains or if no charger is
connected, the screen is not active and can not be
selected.
The green arrow shows the current charging current and
the charging voltage. The battery icon displays the current
charge phase (charge / charge / maintain) and battery
temperature. To the right of the battery, the voltage
measured by the charger and its frequency are displayed.
The side buttons have the following function:
LIMIT +/-: In order to adjust the charging current to the battery system or a weakly secured shore
connection, the charging current can be adjusted in 10%. The minimum value is 40%.
Night-Mode: With the devices with active fan it can be switched off to allow a noiseless operation.
The max. Charging current is limited to the thermal conditions of the charger. This feature is
automatically disabled after 8 hours.
5.1 Battery history
