Battery-Monitor BLS
REV 1A – APR 2019 - Software Version 1A
page 13
The battery page displays the main battery across the
shunt on the left. The arrow shows the current and battery
voltage. If the arrow is green, the battery is charged, a red
arrow indicates the current discharge.
In the right section of the battery screen, up to two battery
voltages of the additional batteries appear. The names
and associated voltage alarm thresholds can be adjusted
in the settings.
The bar height of the battery indicates the level of the battery.
The lower gray portion of the battery is the unusable portion of the
nominal battery capacity detected at the last complete discharge. This
proportion provides information about the state of life of the battery.
With a short press on the battery icon can appear between the ads
- capacity in% - capacity in AH - remaining time - battery temperature -
change. Alternatively, the following error messages appear:
"Not synchronized"
The shunt has been restarted and the displayed capacity value does not yet
correspond to the true capacity level. Then, the battery group connected
to the shunt must be fully charged with a charger, so that the capacity
indicator can synchronize with the state of charge of the battery. The
message then goes off automatically.
"Recharge battery"
the battery capacity has fallen below the set warning threshold. In order to
achieve a long life of the batteries, the charging process should be initiated
at the next opportunity.
"Reserve"
the battery capacity has max. 20% remaining capacity and must be charged
immediately to prevent the harmful deep discharge
