Standby mode
If device learning IR completed, device will in standby mode.
In this mode you can clear IR code
、
reset
Z-Wave™ Dongle and
change mode to
Adjustment or operation mode.
Function
Description
Annotation
Change mode
Short press the button on the top of the device.
Change to operation mode.
Long press the button on the top of the device.
Change to adjustment mode.
Z-Wave™
Please refer to Z-Wave™ Network.
Reset IR Code
Please refer to IR Learning.
IR Sending
Press the button on the left back of the device
twice in 2 second.Confirm the function of the IR
code is correct.
Adjustment mode
If device learning IR completed, device will in standby mode. Long
press the button on the top of the device, then green LED will
flash. This implies device is in adjustment mode.
When someone is in the detection range 2 second, buzzer will
beep. Number of beep is related to the distance of the someone.
You can adjust device fixed angle to adjust the detection range of
the PAR02.
Long press the button on the top of the device, return to standby
mode.
Operation mode
If device learning IR completed, device will in standby mode. Short
press the button on the top of the device, then green LED will on.
This means device is in operation mode.
Every time the device enters the operation mode, the device will
scan the space first. At this time, please keep the front clearance
of the equipment. Wait for the beep to stop , the device will start to
operate.
When someone is in the detection range, the table below provides
an operation of detect time.
Detect time
Operation
10 second
Buzzer will beep twice.
30 second
Buzzer will beep five times.
Default send notification time.
60 second
Buzzer will beep twice.
Send the IR code.
Default send notification time.
Can use Z-Wave™ Controller to send command Simple AV Con-
trol, then PAR02 will send IR Code.
Command
class
Key Attributes
Command
Description
Simple AV
Control Set
1
0027 (HEX)
Device in operation mode, send IR
code.
Short press the button on the top of the device, return to standby
mode
Adding to Z-Wave
™
Network
3
