EN - 15
03/2015
Copyright © 2015, Fast ČR, a. s.
Adding rinsing aid
The rinsing aid is released during the last rinse so that water drops do not remain on your dishes causing stains.
It also improves drying due to the fact that all the water fl ows off the dishes. Your dishwasher is designed to
only be used with a liquid rinsing aid. The rinsing aid compartment is located on the inside wall of the door
next to the dishwashing detergent compartment.
Fill up the compartment by opening it and pouring in the rinsing aid until the indicator goes completely dark.
NOTE:
Use only branded dishwasher rinsing aids. Never pour other mixtures (such as liquid detergents, etc.) into
the rinsing aid compartment. Otherwise the dishwasher may be damaged.
When should the rinsing aid be refi lled?
If the rinsing aid compartment is empty, the relevant indicator light on the control panel will turn on
indicating the need to add rinsing aid. After fi lling the compartment with rinsing aid the entire indicator
is dark. As the rinsing aid is gradually used up the point of the indicator becomes smaller. Never allow the
amount of rinsing aid to fall below 1/4 of the compartment volume.
If there is no rinse-aid warning light on the control panel, you can judge the amount of rinse-aid by the color
of the optical level indicator „D“ located next to the cap (see picture below).
Indicator
Full
¾ full
½ full
¼ full – should be refi lled
Empty
D
1
2
3
4
5
6
MAX
Filling process
1. To open the dispenser, turn the cap to the „open“ (left) arrow and lift it out.
2. Pour the rinse aid into the dispenser, be careful not to overfi ll.
3. Replace the cap by inserting it aligned with „open“ arrow and turning it to the „closed“ (right) arrow.
2
1
3
Содержание PDP 4 WH
Страница 1: ...DISHWASHER USER S MANUAL PDP 4 WH...