Philco PDP 4 WH, Руководство пользователя

Страница: 14 / 36

EN - 12
03/2015 Copyright © 2015, Fast ČR, a. s.
Electrical connection
Before inserting the plug into the electrical socket, make sure that:
-
the socket is earthed and complies with current regulations;
- the socket can withstand the maximum load of the appliance, which is indicated on the data plate located
on the inside of the door(see description of the appliance);
- the power supply voltage falls within the values indicated on the data plate on the inside of the door; the
socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to
replace the plug (see assistance); do not use extension cables or multiple sockets.
Warning
Once the appliance has been installed, the power supply cable and the electrical socket should be easily
accessible.
The cable should not be bent or compressed.
If the power supply cable is damaged, it must be replaced by the manufacturer or Technical Assistance
Service in order to prevent all potential hazards.
The company shall not be held responsible for any incidents that occur if these regulations are not observed.