Philco PDP 4 WH, Руководство пользователя

Страница: 28 / 36

EN - 26
03/2015 Copyright © 2015, Fast ČR, a. s.
1. To remove and clean the fi ltration system turn the fi lter anticlockwise and then lift it up.
2. Pull out the metal/plastic fi lter.
3. Take the course fi lter out of the fi ne fi lter.
2 1 3
NOTE:
Follow all the steps of this procedure remove the fi ltration system; then reinstall it by proceeding
from step 3 to step 1.
Recommendation:
After every use of the dishwasher check that the fi lters are not clogged.
You can take out the fi ltration system by unscrewing the coarse fi lter. Remove any food remains and clean out
the fi lters under running water.
NOTE:
You should clean the entire fi ltration set once per week.
Cleaning the fi lters
To clean the coarse and fi ne fi lters use a brush. Reassemble the individual parts of the fi lter as shown on
pictures 1, 2 and 3. Reinsert them back into the dishwasher in their place and press them downwards.
WARNING:
Do not knock on the fi lters when cleaning them. Otherwise the fi lters could bend, which would lower
the effi
ciency of the dishwasher. Never use the dishwasher without a fi lter. An incorrectly seated fi lter
may lower the effi ciency of the dishwasher and cause damage to dishes.
Dishwasher care
You can clean the control panel using a light damp wiping cloth. Thoroughly dry the area after cleaning. Clean
the exterior parts of the dishwasher using a quality polish. Never use any sharp items, steel wool or coarse,
sandy cleaning products to clean any part of the dishwasher.
Cleaning the door
To clean the door edges use a soft, warm, damp wiping cloth. To prevent water leaking into the door lock or its
electronic parts, do not use any cleaning agents in sprays.