• This device should be installed, adjusted, and serviced by qualified electrical personnel
familiar with the construction and operation of this type of device and the hazards
involved. Failure to observe this precaution could result in death or severe injury.
• Incorrect installation and testing of the charger could potentially damage either the
vehicle’s battery and/or the device itself. Any resulting damage is excluded of the
warranty for the device.
• Ensure that the EV cable is well positioned during charging, so it will not be stepped on,
tripped over, or subjected to damage or stress.
• Do not use this device with a frayed EV cable which has damaged insulation, or any other
sign of damage.
• Never leave children unattended while the vehicle is charging and never allow children
to play with the EV cable.
• Confirm with the local electrical requirements for the gauge, temperature rating, and type
of wire material used for the overcurrent rating.
• Lockout all electrical source circuit feeding the device in the open position before
beginning wiring or terminations. Failure to follow the instructions could result in severe
bodily injury or death.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
Note: The country code selection is for non-US model only and is not available to all US
model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation
channels only.
2
