PhD Solutions MXC-U-P442-A-HDTL, Руководство по эксплуатации

Страница: 25 / 48

20 20
Once in the CLI (Command Line Interface) type “Telnet” followed by
the IP address of the unit and “23”, then hit “Enter”.
This will connect us to the unit we wish to control. Type “help” to list the
available commands.
Note: Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive. If the IP address is changed
then the IP address required for Telnet access will also change
accordingly.