PhD Solutions MXC-U-P442-A-HDTL, Руководство по эксплуатации, Страница: 15 / 48

10 10
6.8 RS-232 and Telnet Commands
6.8.1 Command Syntax
The RS-232/Telnet command structure for this unit is both fl exible and
powerful, and allows for a parameter to be set across multiple ports
simultaneously within a single command transmission. This section will
detail the command syntax used to send both simple (single port)
commands as well as the more complex commands.
The following multi-function syntax is specifi cally for use with these
commands: “HDMI_Out” and “HDBT_Out”. “ZoneAvPair” has a special
structure that will be explained separately. All other commands must
be sent within discrete transmissions.
• Basic Command Format
Use this syntax to set or change a single parameter for a single input/
output port.
<Command> {Port} {Parameter [= Value]}
Examples: HDMI_Out F VideoSrc=1
HDBT_Out A VideoSrc=3
• Basic Command Format (ZoneAvPair)
The ZoneAvPair command requires multiple variables to defi ne the
location of the slot’s value to adjust. This command only accepts 2
possible parameters: “VideoSrc” and “Load”. Use the following syntax
to set or change a single parameter for a single slot assigned to an
HDBaseT or HDMI output port.
ZoneAvPair HDBT_Out {Port} Slot {Slot} {Parameter [= Value]}
Examples: ZoneAvPair HDBT_Out B Slot 5 VideoSrc = HDMI_In 2
ZoneAvPair HDMI_Out F Slot 3 Load
• Multi-Port Command Format
Use the following syntax to set or change a single parameter for
multiple ports. Note that each additional port uses the “+” character
for separation. The number of ports allowed in a single command is
limited by the number of ports on that specifi c interface.