PhD Solutions MXC-U-P442-A-HDTL, Руководство по эксплуатации

Страница: 9 / 48

4 4
OLED menu, or to back out from menu items. For a description of
the menu tree, please refer to section 6.6.
6
ENTER: Press this button to confi rm selections.
7
+/IN: Within the menu, this button moves you up within the menu
tree. Otherwise, in routing mode, this button allows you to make
your input source selection.
-/OUT: Within the menu, this button moves you down within the
menu tree. Otherwise, this button starts routing mode and allows
you to begin your output destination selections.
8
PRESET: Press this button to recall saved presets. A maximum of 8
presets can be stored in the unit. Presets are created and stored
via the WebGUI. Please refer to section 6.10.1 for advanced preset
settings.
9 LOCK: Press and hold this button for 3 seconds to lock/unlock
all buttons on the front panel. The OLED will display an “L” in the
upper right corner to indicate the front panel is locked.
10
OLED WINDOW: Displays the unit’s menu, settings and information.
6.2 Rear Panel
1 2
3 4
V+
GND
GND GND
V+
CONTROL SERVICE MAIN 24V
RS232
ALL
IR IN IR OUT
IR IN IR IN IR IN IR IN
CAT5e/6/7 OUT CAT5e/6/7 OUT CAT5e/6/7 OUT CAT5e/6/7 OUT HDMI IN HDMI IN HDMI IN HDMI IN HDMI OUT HDMI OUT
IR OUT IR OUT IR OUT IR OUT
ZONE
A
UDIO OU
T
A
UDIO OU
T
A B C D
R L R L R L R L
1 2 3 4 E F A B C D
6 7
4 5
8 9 10
1 2 3
1
HDMI IN & IR OUT 1~4: Connect up to 4 source devices to the
HDMI ports using appropriate quality HDMI cables. Input source
devices include Blu-ray players, set-top boxes, game systems
and so on. These inputs are DVI-D compliant (with the use of
DVI to HDMI adapters or cables). Attach IR blasters to the IR Out
ports to transmit the IR signals received from connected HDBaseT
Receivers. The IR signal routing follows the HDMI signal routing.
Note: The use of “Premium High Speed HDMI” cables is highly
recommended.
2
HDMI OUT E & F: Connect up to 2 HDMI displays using these HDMI
output ports. These two HDMI ports can be either independent