PhD Solutions MXC-U-P442-A-HDTL, Руководство по эксплуатации

Страница: 12 / 48

7 7
6.4 Remote Control
1
POWER: Press to power the unit on or place it
into stand-by mode.
2
LOCK: Press to lock/unlock the front panel of
the matrix unit.
3
MUTE: No function.
4
IN 1~4 & OUT A~F:
[Local matrix control]: When controlling the
unit directly. Input selection from 1~4 and
output selection from A~F (refer to section 6.1).
[Zone A/V Pairing]: When controlling the unit
via an HDBaseT receiver in a remote location.
Pressing buttons 1~4 will switch to the A/V
source assigned to the number depending
on your current zone. These assignments are
confi gured via the WebGUI (refer to section
6.10.2).
5
MENU/CANCEL: Press the “MENU/CANCEL”
button to enter the OLED menu, or to back out from menu items.
6
PRESET: Recall matrix presets. The presets are confi gured within the
WebGUI.
7
+/IN: Within the menu, this button moves you up within the menu
tree. Otherwise, in routing mode, this button allows you to make
your input source selection.
-/OUT: Within the menu, this button moves you down within the
menu tree. Otherwise, this button starts routing mode and allows
you to begin your output destination selections.
◄/VOL- & ►/VOL-: No function.
ENTER: Press this button to confi rm selections.
Note: This remote control is designed for the full family of matrix
products. Some functions are not available on all units.
POWER LOCK MUTE
1/A 2/B 3/C
4/D 5/E 6/F
7/G 8/H 9/I
10/J PATTERN
+/IN
MENU/
CANCEL PRESET
/VOL+ /VOL-
CR-163
ENTER
-/OUT
1
2
4
3
5
7
6