50
MAINTENANCE
Replacement of lamp
Turn off the power switch and disconnect the power
supply plug from the outlet.
1.
Remove 2 screws fixing the shade by using a
screw driver as shown in the figure.
2.
Pull the lamp downward with lead wire connected.
3.
After removing the water-proof rubber on the both
sides, remove the socket from the lamp.
4.
Attach the socket to a new lamp and then replace
the water-proof rubber.
5.
Replace the shade and fix with 2 screws.
•
The lamp is consumable.
Replacement of glow starter
The glow starter is located at the switch box on the upper left side.
1.
Turn off the power switch and disconnect the power supply plug from the outlet.
2.
Turn the glow starter to counter clockwise to remove. (See figure below)
3.
Set a new glow starter. (type: FG-1P)
Glow
starter
