24
PROGRAMMING (MENU/Edit)
5.
Highlight the numerical value of each time section (Time) by shift key, and input as below by character
input key.
CAUTION
The time setting value depends on each mode, clock mode and timer mode. In the case of clock mode,
the setting range is between 00:00 and 23:59. If the setting is larger than 24:00, the step of immediately
before is repeated limitlessly. Set the step with timer order. If an earlier time than the previous step is
inputted, the previous step is skipped. In the case of timer mode, setting range is between 00:01 and
99:59. The setting of “99:99” causes limitless repeat.
6.
Shift a cursor downward by the downward shift key. Set the temperature as follows. The setting
range is between -10.0
o
C and 60.0
o
C.
CAUTION
The settable temperature is between -10.0
o
C and 60.0
o
C. The temperature control range is between 2
o
C and 50
o
C when light add on kit (MIR-L15; sold separately) is installed. In this case, temperature
fluctuation may exceed ±1.5
o
C or it may take longer time to pull down the chamber temperature.
CAUTION
The unit continues to run with a step just before the step having time setting of over 24:00 when a
program is run in clock mode.
o
C
T i m e
1 9 : 0 0
2 1 : 0 0 2 2 : 0 0 2 3 : 0 0
T e m
p 4 . 0 4 . 0 4 . 0 4 . 0
1 0 S
t p
3 1 C y c
o
C
T i m e
6 : 0 0
9 : 0 0 1 1 : 0 0 1 3 : 0 0 1 5 : 0 0 1 7 : 0 0
T e m
p 3
7 . 0
4 . 0 4
. 0 4
. 0 4 . 0 4 . 0
M
E
N
U
S
a
v e
+ / -
C a n c e l
When adding the “-“ to the set value of temperature or erasing the “-“ from the set
value of temperature, press the menu button (MENU) to show the menu window.
/- and press the enter key (ENTER).
10St p 31Cyc
℃
T i me
6 : 00
9 : 00 11 : 00 13 : 00 15 : 00 17 : 00
Temp
12 . 0
15 . 0
20 . 0
25 . 0
20 . 0
18 . 0
During temperature setting, “
o
C” is displayed at upper left.
℃
T i me 19 : 00 21 : 00 22 : 00 23 : 00
Temp
15 . 0
15 . 0
12 . 0
10 . 0
