22
SETTING OF CHAMBER TEMPERATURE AND CO
2
DENSITY
●
In each setting mode, the indicator returns to the current temperature and CO
2
density display mode
automatically when 90 seconds has passed without any key operation.
●
Do not use the calibration key (CAL) on the control panel when the unit is under normal conditions. The
unit enters calibration mode by pressing this key. Wrong key operation may affect the basic performance.
When the unit enters calibration mode by mistake, wait for 90 seconds without any key operation until the
control panel returns to chamber temperature display mode.
CAUTION
When operating in the no humidifying mode, drain all the water from the water reservoir. Remains of
water may result in increasing humidity in chamber to about 80%R.H.
