Setting Date, Time and Language
Setting the Date and Time on the IQ4
Date and time are set and controlled via the IQ4’s menu. When the IQ4 is
initially shipped from factory, or If the IQ4 has been without power for a long
period of time, it will automatically prompt you to set the time and date. Touch
the screen and scroll through the numbers to attain the appropriate date and
time. The time and date is applied to the EXIF data in all files captured with
the IQ4. You can change this later in the Menu under
IQ Settings > Date and
Time
.
Setting Language on the IQ4
The XF IQ4 Camera System is delivered with the language set to English by
default. Follow the steps below to change the language of the IQ4 to one of
eight others available, including German, Russian, Korean, Japanese, Chinese
(simplified), Swedish, Italian and Spanish.
Swipe up from the bottom of the screen and tap on the IQ4 Menu icon.
Navigate to the
Language
menu item and select the preferred language option.
Each choice is displayed using the native language, with English noted in
parentheses.
Note: If you choose a language by mistake, and can no longer read the menu,
look for the menu item with
(L)
in it.
Security Code Protection
Access to the IQ4 can be protected by a four-digit security code that you will
have to enter on the touch screen after it has been turned on.
The security code protection is a safety measure to ensure that other people
cannot gain access to the IQ4 without your consent. This is of particularly
importance since IQ4 can provide wireless access over a network that other
people might have access to.
You can setup the security code as well as the level of protection by selecting
Menu > Security Settings
on the IQ4. Please see the Security Settings chapter
later for full details.
Ready for Capture Beep
You can control whether you would like to get a sound beep from the camera
system whenever it is ready to capture the next image. It is on by default. This
is useful under a busy shot where you need to concentrate on your subject at
hand instead of checking to Capture Ready icon in the Status Bar on the
screen.
This is set by going to the IQ4 Menu and selecting IQ Settings > Ready Beep.
You have three options:
• None (O
ff
)
• Single (one beep)
• Multi (longer beep)
13
Readying the camera system
13
XF IQ4 Camera System Manual |
