PhaseOne iXU Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 40

PhaseOne iXU Скачать руководство пользователя страница 37

73

72

9. Firmware

The camera's LCD screen displays technical information
about the hardware and embedded firmware of the camera.
This is especially useful if support is needed or if you want
to check if Phase One is offering a newer firmware update.
Please make a note of the firmware menu contents before
contacting your dealer or Phase One Support.

Checking the Firmware Version

In order to determine if you have the latest firmware installed:

1.

Go to Menu > About System.

2.

Check to see if the firmware version installed on the

camera is the same as the latest version available in the
Downloads section of industrial.phaseone.com website.

About the Phase One Firmware Updater
Application

The Phase One Firmware Updater application is used to
update your Phase One aerial camera with new firmware.
The Firmware Updater is available in the Downloads section
of the industrial.phaseone.com website.

The Firmware Updater does not in itself contain any firmware
— it detects the camera attached, checks online for the latest
firmware and retrieves and installs the firmware packages for
your device.

Check the Firmware Updater Application Installation Guide
for detailed instructions on offline methods of firmware
updating.

Installing the Firmware Updater
Application

To install the Phase One Firmware Updater Application,
download it from the Downloads section of the industrial.
phaseone.com website and do the following:

1.

Open the zip file, extract and store the FWUpdater.msi.

2.

Double-click FWUpdater.msi to start the Firmware
Updater Setup Wizard.

3.

When installation completes, click:
Start > Phase One > Firmware Updater

.

«
...
35
36
37
38
39
...
»

Содержание iXU









































Отзывы:

Нет отзывов