PhaseOne iXU, Руководство по установке, Страница: 21 / 40

41 40
h.
Repeat for additional iXA-R/iXA cameras.
6. Connect a Phase One control cable from data terminal B
of the last camera in the iXA-R/iXA group.
7.
Connect the other end of the Phase One control cable to
the flight management system or other device.
Connecting iXU-RS/iXU-R/iXU and iXA-R/
iXA Cameras in the Same Array
iXU-RS/iXU-R/iXU and iXA-R/iXA cameras can be connected
to capture simultaneously in the same array. When mixing
iXU-RS/iXU-R/iXU and iXA-R/iXA cameras, iXU-RS/iXU-R/
iXUs must be connected to each other to form a group and
iXA-R/iXAs must be connected to each other to form another
group. These two groups are connected to each other with a
special sync cable (iXU to iXA sync cable p/n 70341).
Note: iXU to iXA sync cables have gray hoods.
Ensure that you have mounted Schneider-Kreuznach fast
sync [S] lenses on the cameras.
Before connecting, ensure that all iXU-RS/iXU-R/iXU cameras
in the array do not have iX Link activated. See "Deactivating iX
Link" on page 47.
To create an array of iXU-RS/iXU-R/iXU and iXA-R/iXA
cameras:
1. Insert an iXU RA control cable into data terminal A (left
one) on an iXU-RS/iXU-R/iXU camera.
2. Connect the other end of the iXU RA control cable into the
GPS/IMU.
3. If the next camera in the array is an iXU-RS/iXU-R/iXU:
a. Insert a multi-sync cable into the iXU-RS/iXU-R/iXU's
data terminal B (right one).
b. Insert the other end into data terminal A of the next iXU-
RS/iXU-R/iXU.
c. Repeat for additional iXU-RS/iXU-R/iXU cameras.
4. If the next camera is an iXA-R/iXA:
a. Insert a iXU to iXA sync cable into the iXU's data terminal B
b. Insert the other end of the iXU to iXA sync cable into
data terminal A of the first iXA-R/iXA.
5.
If the next camera is another iXA-R/iXA camera:
f. Connect a Phase One multi-sync cable from data
terminal B of the iXA-R/iXA.
g. Insert the other end into data terminal A of the next
iXA-R/iXA.
* For iXU-RS/iXU-R/iXU cameras, see "Wiring a Control
Cable" on page 12.
For iXA-R/iXA cameras, see "Wiring the Camera Control
Cable" in the iXA-R/iXA Installation Guide.
Control cable*
Multi-sync cable
iXU to iXA sync cable
USB 3.0
Power
Data Power
Aircraft
power bus
Flight
Management
System
GPS/IMU
iX Controller
USB 3.0 Power
A B
Phase One
iXA-R/iXA
USB 3.0 Power
A B
USB 3.0 Power
A B
Phase One
iXU-RS/
iXU-R/iXU
Phase One
iXA-R/iXA
USB 3.0 Power
A B
Phase One
iXU-RS/
iXU-R/iXU