33
32
5. Connecting a Camera
Attaching the Camera to a Pod
Attach the iXU-RS/iXU-R/iXU camera to a pod using four M4
bolts.
Note: Do not insert bolts deeper than 6 mm into the threaded
holes on the front of the camera.
Connecting a Control Cable
1.
Insert the iXU RA control cable into a data terminal on the
iXU-RS/iXU-R/iXU camera body.
2.
Connect the other end of the iXU RA control cable to an
external device.
Note:
The two data terminals are not interchangeable.
Connect devices to data terminal A or B depending on the
specific device. See details in "Connecting Control Cables to
Devices" on page 34 and "Activating iX Link" on page 46.
Connecting the Power Cable
To connect the camera to the aircraft's power bus:
1.
Insert the iXU RA power cable to the power input of the iXU-
RS/iXU-R/iXU camera.
2.
Connect the other end of the iXU RA power cable to the
aircraft’s power bus.
Note: When not in use, disconnect the power from the
camera.