59
58
1.
With a 2 mm hex key, unscrew the screw on the CF cover.
2.
Remove the CF card cover.
3.
Insert a CF card with the brand label facing the display
end of the camera as shown in the image.
4.
Replace the CF cover and tighten the CF card screw
using a torque of 15 cNm.
Note: To eject the card push the small button above the card
once, and an ejecting pin comes out. Pushing this pin all the
way back in ejects the card.
7. Storing Images
Images can be saved to an onboard computer running
iX Capture, the Phase One SDK or Capture One using USB 3.0.
An alternative method is to work in portable mode using a
CompactFlash (CF) card as your storage device.
CompactFlash Card Usage
It is important to follow a few simple guidelines to help avoid
loss of data when working with CompactFlash cards, card
readers and digital cameras. Phase One recommends that
you test-drive all new CF cards. By performing an initial test
to verify that the capture files are stored properly on the card
and can be accessed on a computer, you can avoid surprises
when you return from a flight. CF cards are manufactured by
external suppliers and Phase One cannot guarantee that the
cards are not defective.
Inserting and Ejecting a CF Card
The CompactFlash card is inserted in the slot located under
the cover on the left hand side of the iXU-RS/iXU-R/iXU
camera.
To insert a CF card: